We are back with another roundup article and today, we are covering a good amount of information about benchtop sanders. If you are a woodworker, you will surely appreciate how useful benchtop sanders are. Having said that, buying a good benchtop sander can be a little frustrating because you need a LOT of data to weed out the wrong ones and select the one that TRULY meets your specific needs. In this article, we are going to an introduction, buyer’s guide and our personal picks for 5 best benchtop sanders to buy in 2018.
Hope you will like our choices and do let us know in case of any suggestions using our contact form as usual.
So, without much delay, here are our top choices for best benchtop sanders for the money.
Best Benchtop Sanders – Our Top 5 Picks for 2018
BencTop Sander Reviews – Our Ratings & Verdict for the Top 5
Benchtop sanders are unique sanders designed to last and offer more power and control for larger sanding projects. They are commonly used by professionals and are typically found in workshops at home. Benchtop sanders are less portable than portable sanders, but they offer more power and more versatility. The most versatile sanders feature a belt and a disc integrated into a single Sander.
First-class sanders are a good investment if you want to work with larger parts or if you have to do a lot of sanding. Portable units are perfect to run on a finished product and clean a finished job. Benchtop sanders are for heavy-duty work and have more power and a larger sandpaper surface for faster finishing. The more powerful engines will also allow you to sand more than wood. It can tackle metal and even steel can be sanded with heavy abrasive paper and a bench grinder.
- Motor Amplifiers: 4.3
- Motor power: ½: 3600 RPM
- Sander Dimensions: 22 x 11 x 12.5 inches
- Tilt range: from 0 to 90 degrees
- Sanding belt size: 4 X 36
- Sanding disc size: 6 X 6
- Warranty: 2 years
- 4.3 amp motor (Offers a maximum speed of 3600 rpm)
- Release lever is present
- Works both as a belt and a disk sander
- Keeps the work area clean
- Adjustable strap angle (0-90 degrees) provided
- Stop bar provided for protection
- It is versatile and reliable.
- This sander easily bleeds smooth’s and removes the uneven edges of your room. It offers better, quick results.
- Its belt adjustment process is very easy and quick to handle. It even alternates from a horizontal position to the vertical or anywhere you want in the middle.
- It has a solid, stable base that provides balance.
- The sander is powerful and can provide rugged performance and is very easy to set up and use.
- It’s cheap and doesn’t drill a hole in your pocket.
- The heavy cast iron base prevents vibrations/vibrations.
- It also has a dust collecting port and a 6 x 6-inch disc.
- WEN 6502 is backed by a 2-year warranty.
- You might feel that the table does not remain perfectly stable sometimes.
Whether you’re collecting professionally or for pleasure, you’ll love GRIZZLY H6070. The success of your materials and construction projects depends to a large extent on the performance and quality of the sanding tools you use in the process and these tools cannot be different from GRIZZLY H6070. Using a quality tool will always give you perfect results and a smooth working process. It is a combined sander (a combination of disc and belt sander) that allows its users to operate it according to their professional requirements.
Whether you need leisurely materials or the quick removal of parts, you will never be disappointed and with a good maintenance will serve you a lot of time without the need for repairs.
- Engine: 1/3 HP
- Tilted tables: left 0 °, right 45 °
- Two dust ports
- Takes 1 “x 30” tape standards and 5 “PSA discs
It is a multipurpose sander
The tool offers a combination of belt sander and disc. This makes the sander unique and versatile, allowing users to make the most of it. The belt sander is 30 inches long and 1 inch wide, while the disc sander is 5 inches. With both housed in a convenience to use a portable unit, one can sand the complex parts, sharpen dry and enjoy contour sanding. You can never go wrong with a GRIZZLY H6070.
It has an exceptionally powerful engine
With a motor capacity of 1/3 HP, the GRIZZLY H6070 stands out as a high-performance sander. The motor is described simply as a single-phase motor, and the disc sander has a working speed of 3450 rpm and handles all sanding work with exceptional operational quality. On the other hand, with this motor, the belt sander covers up to 3150 square feet per minute. In short, these tools give you quality results and save you time and energy.
Works as a flexible belt sander
With GRIZZLY H6070, the tables used for disc and belt grinders are very flexible and versatile. They tilt up to about 45 degrees, providing users with better machine utilization. You can use your sander for various requirements using its variable positioning which makes your job more precise and easy.
- The GRIZZLY H6070 has an exceptionally powerful engine with a working speed of 3450 RPM.
- The tool has versatile and flexible tables for the belt and disk sanders. They tilt about 45 degrees to allow users to use the machine at will.
- The tool is lightweight, so easy to work even for long hours.
- Because it is a combined sander, it is ideal for professional users because of its versatility that allows its use as a disc sander and belt sander.
- In addition, its pricing is excellent considering its quality and performance.
- The Grizzly H6070 handle is made of plastic which makes it easy to break if misused. However, it can still be used even after the plastic part has been broken, but it will be difficult.
- As the machine does not offer a reverse function, it can be very productive, but from a different point of view, it can be very dangerous for users.
JET has been known for years for its high-quality tools and machines. They provide quality products to their customers and have earned their trust and respect. Your power tools are powerful enough to perform heavy tasks for applications such as sanding, cutting, bending, drilling, or treating metals.
As far as sanders are concerned, this company has produced striking sanders with innovative technology known all over the world. The JET J-4002 JET 1-by-42-inch table belt and disc sander are probably one of the best JET sanders ever introduced. In addition to its high quality, this sander has multiple features that make the task easy and fun.
Each magazine needs a combined sander capable of delivering superior finishes each time. The JET-J4002 is a powerful and versatile machine that prevents puzzles, scroll saws or manual files from being performed and finishing at the same time. The luxury miter, detachable plate, and cast iron construction are among the features that attract the professionals of this JET machine.
- Motor power: 115
- Engine Phase: 1 Ph
- Style (type): strap and disc
- Transmission Speed (RPM): 1725
- Motor (HP): 41277
- Tape Speed (SFPM): 3000
- The abrasive belt performs the work of a jigsaw, a copier saw or a manual file while the material is removed and terminated at the same time, allowing the operator to penetrate small openings and manipulate extraneous shapes and angles.
- Deluxe tongue gauge that rotates and locks for common angles, 45 ° left and right.
- The removable plate allows the sanding, grinding or finishing of external curves or unevenly shaped parts on the belt.
- Sturdy steel base and rubber feet.
- Adjustable dust drier and dust removal chute.
- Hinged wheel cover
- Cast iron construction
- Fast and effective
- It can be used for several purposes.
- A higher quality finish is achieved by using this
- Nothing major
Compact and powerful, the 1/30-inch, 1/3 HP POWERTEC belt sander is the ideal sander for your workshop. This convenient belt sander offers the ultimate in precise and flawless sanding and is very easy to use. With its multiple adjustment options, this versatile and customizable work machine does the job to your specifications. An adjustable belt tracking function ensures that the belt stays in true alignment.
The convenient adjustable tilt table optimizes sanding when working with folded paper. And an easy-to-remove back plate allows sanding on jobs with curved or uneven shapes. This small yet sturdy machine has even more essential attributes. The sturdy rubber feet effectively absorb vibration from the machine for a stable sanding operation.
The dust/chips are effectively extracted through the convenient built-in dust slide. The cast aluminum board measures 5 inches by 5 inches. Its 1/3 HP engine provides up to 3260 rpm, perfect for small carpentry jobs and sharpening projects. Minimize discomfort and maximize results with this “must have” addition to your workroom.
- Powerful 1/3 HP induction motor for optimum sanding results.
- Adjustable band tracking guarantees faithful alignment.
- The removable back plate facilitates sanding in curved or uneven jobs.
- 0 degrees – 45-degree tilting table for precise sanding of the angle
- Rubber feet absorb vibration for greater stability
- The base is bent and welded and is strong enough.
- The motor has enough power to sanding the edges of certain edges and sharpening the turning tools.
The sander is quite quiet and does not vibrate too much. The vibration will probably be further reduced if the V-belt is replaced with a V-belt.
- The sanding belt is easy to change but requires removal of the table and a small cap on the side of the drive roller
- It is very easy to adjust the tracking of the tape and the tape does not work when the sanding surface is applied.
- The belt rollers are made of aluminum and look durable. The sanding disk I received was balanced, but the print was about 0.050.
- It was assembled except the miter table and stuck on 9 “disc sandpaper.
- The bag collector does not inflate more than 45%, it is low and folds up to the neck of the bag to block any dust that may enter the bag.
- Great value for the price.
- This is the best 4 “sander available for silver. I have looked at several others, including the Porter Cable / Delta and this one has the best construction and the highest power of the 4” sander.
- Only another pair would be the Woodtek for about the same money.
- Most of the other 4 “sanding machines run only 1/3 horse, where this is 1/2 horse.
- If you need anything heavy to get the 6 “sander with 1 HP.
- Since this sander doesn’t come with an instruction manual, you might find it’s little cumbersome to set this thing up. However, a couple of YouTube videos can surely come handy.
We really appreciate the Powertec BD4800 as it has a compact design. If you are looking for a powerful tool that does not occupy much of your workspace, you will love this band disc sander. You will also find that this sander is relatively affordable. This is the perfect choice for anyone embarking on the hobby of carpentry.
Although it is affordable and compact, it is always made of sturdy and high-quality materials. You will not have to worry about the vibrations that come from this sander because it is made with a cast iron base. In the sander, you will find a ½ HP motor that provides speed and reliability to the belt and disk sanders.
- Motor induction: 1/2 HP peak
- Strap Size: 4 “x 36”,
- Strap surface: 4 x 8-3 / 8 “
- Belt velocity: 1850 FPM,
- Disc diameter: 8 inches,
- Disc speed: 3000 rpm
- Integrated dust removal system for rapid removal of wood chips from a full-size dust bag
- The interchangeable worktable works with discs and belt sanders.
- 0 to 45-degree sanding table with miter gauge for precise sanding of the angle
- Easy belt change
- Cast ironwork table (inclined at 45 degrees)
- 7.5 A motor
- Interchangeable aluminum table
- Integrated dust collection system
- Relatively quiet operation
- Large disk sizes and belt sander.
- You can take the POWERTEC BD4800 for just over $ 100, which makes it very cheap.
- The cast-iron construction of the POWERTEC BD4800 as very durable and they live up to the promise of being built to last.
- The small size makes it a real space saving for the tool store, it is a great choice for lovers of smaller projects.
- Little noisy
- You would need to spend a bit more time in adjustment of the belt
How to Choose a Good Benchtop Sander (Buyer’s Guide)
Before going to Amazon or going to Walmart to buy the first sander, you must understand the main difference between the performance of these tools and why prices vary a lot?
Choosing the right value for money
Many good styles and options are on the market; the price ranges can vary from one hundred dollars or more. A general rule about price differentiation is that the more expensive the tool, the higher the quality and performance.
First, consider the importance and complexity of your project (s). Next, consider what applications your sander will use, and possible future uses. Someone will use it for a specific job, while others will need it for various projects and carpentry jobs. In case you are doing carpentry, your hobby is not limited to the cheapest sander you find; spend a little more money and buy a more expensive tool, will reimburse you. Investing in a quality belt sander will pay for sure. Above other improved performance, you will find an excellent tool:
- Reduces stock thickness and polish
- Better polished,
- Help to level,
- Improves the appearance of subpar
- Neatens joined the rear section.
Technical Aspects to Consider
Now, having briefly reviewed the “financial” aspect of buying the best belt sander for your needs, it’s time to develop the technical side of these heavy tools.
Power and Weight
Initially, examine how much power and weight you need. It is not necessary to have a considerable amount of power at your disposal. Of course, having above average power can be useful. However, most operators probably do not need this. When viewing a sanding tool, observe the motor rating ratings. Some engine amperage ratings are six and others can be as high as ten or even more … the larger the number, the higher the amount of power. These power tools are used in horizontal positions.
Therefore, the weight of the tool does not have to be something that you worry too much about. If you are someone who intends to work with the tool while upright, you can think about weight. Obviously, if the tool is very heavy, it will be more difficult to work with the vertical tool.
For those who want to use these tools vertically, ten pounds or lighter sander will be good options. They will be easier to hold for longer periods. Machines weighing from twelve to fifteen pounds are most suitable for horizontal sanding. Of course, you can also use a 10-pound sander horizontally, and it will work well, you just need more muscle to work.
Consider Shape And Size
You will find that the sizes and shapes of belt sanders vary from one model to another. There are usually two main sizes that are popular in the market. Sanders 4 × 24 and 3 × 21 inches. A 4 × 24-inch tool is preferable for heavy duty work.
For example, if you need to sand heavily, a 4 × 24-inch model will work fine. However, the 3 × 21-inch model is probably the best to ensure the right combination of speed, power, and balance. It will be easier to control. In addition, you should pay attention to the size of the belt.
The larger the belt, the more weight a tool will weigh. Sanders with larger belts will help complete the job in a shorter time. If you are looking for high performance, look for an “industrial” belt. If you want a versatile tool that works for a variety of tasks and does not necessarily have to be industrial grade, you may prefer a smaller belt size. Usually, a 3 × 21-inch sander is the choice of most customers.
Think Speed Patterns
In the past, Sanders had no variable speed options. There was only one speed and that was it. Nowadays, most of these power tools offer a variable speed with ranges between 500 and 1500 feet/minute. Each model is different, so you should read the product details to determine the applicable speed settings. If you want versatility, use a quick sander. You can adjust the speed for different jobs and this will give you more options.